Custom Deckard Blaster stands

[andy]

I have about 15 of these now I am willing to part with...



They fit most versions of these replicas, including Richard Coyle versions up to Version 4.* at least, Hartford models, Sidkit, Stunt castings, PKD 1,2,3, Magnum and Snub versions (some may have the bottom of grip resting on surface), Wilco, and all the Offworld versions including the old resin kits.

I have decided to finish them the best I can myself. They will be $12 each before shipping. I will try to keep that price for the next batch too. Shipping ConUS should be $4 for up to two stands and then $1 more for the next 2 and so on. Faster shipping will be $10 for up to 6 stands. International will be at cost.

Now I will only be taking money for them as I finish them, but I need to have an idea on how many people want so I know what to order for the next batch. I hope to get enough to make sure everybody who wants these can get them.

People can also still get the unfinished stands at the lower price if they want.

I am looking for $7 each plus shipping for ones that are not trimmed down yet (i.e. they need the radius's notched out square, and polished if wanted). I am willing to do trades and other deals to a point. I will also be making this an interest thread to make an order to have more made.

List to purchase so far

1...5-Bassnoir (finished)paid/sent
6-mgoob (unfinished) paid/sent
7-offworld66 (finished)paid/trade/sent
8-Rick Deckard (finished)paid/sent
9...10-Jfuste (finished+3 second batch)paid/sent
--------------------------------end of first batch
Second Batch
1-megamicrofish(x1 finished)paid/sent
2-Oldzey (x2 Finished)paid/sent
3-IrishJedi (finished)paid/sent
4-atacpdx (x5 Unfinished)paid/sent
5-BeastMaster (unfinished)paid/trade/sent
6-Harry Harris (finished)paid/sent
7-jeeves(finished)paid/sent
8-watahi (x5 finished)paid/sent
9-10-kurtyboy(x2 finished)paid/sent
11-Nathanbrazzil (finished) paid/sent
12-bolsoncerrado (finished)paid/sent
--------------------------------end of of second batch

waiting list for next run and current batch as of May 2011
1-Stuntman Mike (x2)
2-jakob2121 (x1)Paid-sent
3,4-Bassnoir (x2)Paid-sent
5-The Loyalizer (x1)
6,7-Harryford Jones (x2)
8,9-hirohawa (x2)Paid-sent
10-12-seesinsilhouette(x3)
13-Ridleyville (x1)
14,15-Ironfist (x2)
16-19-hole dweller (x4)
20-B-Movie Zombie (x1)
21-Perigee (x1)
22,23-Aguirre (x2-3)
24-Bassnoir (x1)
25-27-bolsoncerrado (x3)
28-gust242 (x1)
29-valis (x1)
30-35-jfuste (x6)
36-E-Wan (x1)
37-clutch (x1)Paid-sent
38,39-gust242 (x2)
40-Fantomaz (x1)
41-790 (x1)
42-45-SKIN JOB 66 (x3)
46-50-FETTERBOBA (x5) paid for 1 unfinished-sent 1

Added on to list after April 28th
51-53-skullsoldier (x3)
54-panaflex (x1)
55-pnag (x1)
56-57-AaronD82 (x2)
58-Gaddes (x1)
59-BeauChaotica (x1)
60-Pnag (x?)
61-62-cinecop (x2-3)
63-64-HALLOWMAN (x2-4)
65-Stefan Jones (x1)
66-Fantomaz (x1)
67-68-Replicant 13 (x2)



Those marked in RED have contacted me that they are still interested. If your name is not posted in red and you want to still get these at this time, please post your interest in this thread. I am running out of room in my PM box, so please post here in this thread first. Since I have not heard back from all those listed as yet, I will let some from the current run go out to a few of the late comers. I am also limiting these to two per customer for now. I am still hoping to get another batch soon, but it is not 100% just yet. Please state your interest as soon as possible, so I don't feel like I am skipping people who showed interest from the beginning. I will try to PM or email some of you, but I might not be able to do so for all of you. Thank you for your interest, patience and understanding with my lack of professionalism on this. I still hope I can make this work the best possible for everybody.

Thank you,
Andy

[Mr Webber]

Would love a fully completed version for my metal sidkit please Andy.
_________________
Formerly offworld66

[Bassnoir]

......I am all in....fully completed as well....1) Offworld...1) Hartford...1) Coyle... 1)Sidkit and 1) Hartford Snub Nose....Thanks Andy
_________________
...the future is not all it's cracked up to be...

[andy]

Fully completed ones will take a while untill I can figure something else out. I am hand filing them right now. I will also have to add a bit more to the price.

I can try to get the guy making them for me to do some more of the finishing for the next batch.

Andy

[Rick Deckard]

1 for an Offworld Blaster for me please.

Thanks

Rick

[andy]

The list above may change as I figure out how I am going to finish these. The initial list was supposed to be for 'unfinished'. I may change the list for totally 'unfinished' and 'finished'(filed down to fit).

I do not have the ability to polish these yet, but none of mine are polished and they work fine and look fine for what I have. Finishing may add at least $5 or more per piece depending. I have no price on polishing yet.

As far as limiting amounts ordered. I may have to limit initial orders. I know international orders will want to group orders to save on shipping for sure.

I also do not know how many more the guy I had do these is willing to do, and if his price will change. So at this point my initial list is closed.

I will keep a running list for the next order and beyond. I hope to keep these available for as long as possible and keep the price down as well.

Andy

[Bassnoir]

...Andy I hope this question is not as obvious as I think it may be....but by finished do you mean cut or file the notches that the blaster magazine and trigger guard will be resting in?.......if so...YES please "finished" would be a great help for me....I who am tool less.......as for polishing?....not so much...
David

[andy]

The notches are mostly cut out, but are radiused on the inside. The Radius's need to be filed or cut out.

Andy

[Bassnoir]

...I see said the blindman....thanks Andy....
David
_________________
...the future is not all it's cracked up to be...

[andy]

I have decided to finish the first batch the best I can myself. They will be $11 each before shipping. I will try to keep that price for the next batch too. Shipping ConUS should be $3 for up to two stands and then $1 more for the next 2 and so on. Faster shipping will be $10 for up to 6 stands.

Now I will only be taking money for the first set, because I am not sure if I can even get the rest made, but I need to have an idea on how many people want so I know what to order. I will have news on that by middle of the week. I hope to get enough to make sure everybody who wants these can get them.

People can also still get the unfinished stands at the lower price if they want.

Thank you,
Andy

[oldzey]

I'd be up for two of the completed stands.

Thanks for offering!

oldzey

[Mr Webber]

Still in for as completed as one as you can do Andy.
_________________
Formerly offworld66

[BeastMaster]

I'd be up for an unfinished stand for my sidkit. though do you know what the shipping cost to the UK would be?
_________________
"F*ck it, it's just a movie. Let him worry about it" Harrison Ford

[andy]

For me it would probably be around $20 give or take a few dollars.

I will PM you with a plan since I may be sending you some other stuff anyway.

Andy

[andy]

I finished up a few of these last night on my dremmel and started hand filing them down to realize that the guy I had do them did not follow my template exactly. They still work but will most likely need additional filing to fit the larger guns. I will try and test fit each of them to all of my different versions in my collection to make sure they will fit everybody and I won't need to do any returns.

News on second batch to be coming soon (I hope).

Andy

[Bassnoir]

...thanks for the update and more importantly all the work you're doing on this effort...those of us without a shred of working talent....salute you.....
_________________
...the future is not all it's cracked up to be...

[andy]

Yours are done BN, I am just test fitting and refining them. I may actually have a try at polishing them, but I still want to state that it is not part of my original offer.

If the first ones I do work okay I may just go ahead and add that to the end product. I will say that sitting side by side with nicely polished acrylic stands I have seen at a friends, these actually disappear as opposed to his that reflect light and compete for your eye's attention with the prop itself. All mine will be unpolished as a result.

Andy

[Bassnoir]

...whatever you have and are doing with them is appreciated by me...looking forward to seeing them.....
_________________
...the future is not all it's cracked up to be...

[andy]

Polishing is not working at this point, so I am giving up on it. I am going to finish these all up tomorrow and try to get the paid ones all mailed out Friday.

Still no word about the second batch yet. I may just try to order 20-30 more and see what he is willing to do.

Andy

[jfuste]

Andy, did you test the stands with a COP 357? If fits, I could be interested in 3 more... (for a total of 8 ).
_________________